Limit search with filter

Contact 
VULKOLLAN<sup>®</sup> Bearing

VULKOLLAN® Bearings Type: V 50 / 30 - V 179 / 50

    Type: V 50 / 30 | Ø 50,0mm | FR kN: 1,00 | FA kN: 0,00
    V 50 / 30
    Article No. 231.066.002
    Type: V 80 / 57 | Ø 80,0mm | FR kN: 3,00 | FA kN: 0,00
    V 80 / 57
    Article No. 231.105.000
    Type: V 101 / 25 | Ø 101,2mm | FR kN: 1,90 | FA kN: 0,00
    V 101 / 25
    Article No. 231.062.000
    Type: V 125 / 40 | Ø 125,0mm | FR kN: 4,50 | FA kN: 0,00
    V 125 / 40
    Article No. 230.014.000
    Type: V 143 / 50 | Ø 143,2mm | FR kN: 6,00 | FA kN: 0,00
    V 143 / 50
    Article No. 231.041.000
    Type: V 179 / 50 | Ø 179,2mm | FR kN: 10,00 | FA kN: 0,00
    V 179 / 50
    Article No. 231.042.000

    With our WINKEL Bearings vertical and horizontal movements on machines and lifting devices can be solved economically.

    Advantage of the WINKEL Bearing system:

    • Reduces your designing and production costs
    • Can take up high radial and axial loads
    • Strong profiles for high stat. and dynamic loads
    • Best dispersion of forces in the profiles
    • Longer lifetime for bearings and profiles
    • Economical assembling by welding bolt
    • Bearing components are easily exchangeable

    Technical details:

    • Outer rings are made from case-hardened steel 20 CrMnTi hardened at 58-62HRC
    • Inner rings are made from bearing steel 100 Cr 6 hardened at 58-62 HRC
    • Cylindrical rollers have flat ground heads, made of 100 Cr 6 steel hardened at 60 – 65 HRC
    • Welding bolts are made from C20 (Material no. 1.1151)
    • Bearings from 4.054 to 4.064 are relubricateable
    • Working temperature of WINKEL Bearings is -20 °C up to +100°C.
    • WINKEL High Temperature Bearings can be used at max. +250 °C environmental temperature.
    • The max. speed for WINKEL Bearings in steel version is 3m/s. For VULKOLLAN® and POLYAMIDE kind of bearings is the max. speed 6 m/s.
    • The clearance between axial bearing and inner side of the profile should not exceed 0,5 mm.
    • Bolt tolerance –0.05 mm
    • Bearings are lubricated with grease grade 3 (e.g. Shell Gadus S2 V100 3)