Close

Limit search with filter

Contact 
 

Standard U-profiles NbV [fine straightened]

Standard U-profile NbV fine straightened

Advantages Standard U-profiles NbV [fine straightened]

  • Profiles in fine straightened version ± 0.3mm / rm
  • All profiles are made from high-quality hot rolled steel S450 J2 mod., in sandblasted version.
  • Lmax = Maximum production length 12m
  • Suitable for WINKEL-Bearings system, we deliver all profiles in fixed lengths, immediately from stock.
  • Higher load capacity with new NbV-series
  • Machined profiles according customer drawing on request.

Standard 0 NbV [fine straightened]
Article number: 113.010.001Standard 1 NbV [fine straightened]
Article number: 113.011.001Standard 2 NbV [fine straightened]
Article number: 113.012.001Standard 3 NbV [fine straightened]
Article number: 113.013.001Standard 4 NbV [fine straightened]
Article number: 113.014.001Standard 5 NbV [fine straightened]
Article number: 113.015.001Standard 6 NbV [fine straightened]
Article number: 113.016.001Standard 7 NbV [fine straightened]
Article number: 113.017.001Standard 8 NbV [fine straightened]
Article number: 113.018.001
 
Technical details:

Standard U-profile NbV fine straightened
Standard 0 NbV [fine straightened]
Article No. 113.010.001 Plus Clamp flange: KF 0

The Standard 0 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 0 NbV [fine straightened] download as PDF

Technical details Standard 0 NbV [fine straightened] | Article No. 113.010.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.010.00110.513.3015.306.60136.0031.401.3012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard 0 NbV [fine straightened]

  • Standard 0 NbV [fine straightened] profile is fine straightened*!
  • The straightness for fine straightness profiles is ± 0,3 mm per meter.
  • All profiles are made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Profiles in mill finish version/not sandblasted
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats

Clamp flange KF 0 | Article No. 290.003.000

Clamp flange KF 0 | Article No.: 290.003.000
Clamp flange KF 0 | Article No.: 290.003.000

Technical dimensions Clamp flange: KF 0

HBLSJegta1b1d1d2d3e1MGewicht kg
121,3601301088,544,541,010,8100406111820,5M 10x301,6

Clamp flange KF 0

H = Height clamp profile, B = Width clamp flange, L = Lenght clamp flange, S = mounting flange strength, g = Width clamp profile, t = Strenght clamp profile, a1 = Distance pin hole, b1 = Distance pin hole, d1 = Diameter pin hole, d2 = Width slotted hole, d3 = Length slotted hole, e1 = Distance pin hole, M = Thread

 
Technical details:

Standard U-profile NbV fine straightened
Standard 1 NbV [fine straightened]
Article No. 113.011.001 Plus Clamp flange: KF 1

The Standard 1 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 1 NbV [fine straightened] download as PDF

Technical details Standard 1 NbV [fine straightened] | Article No. 113.011.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.011.00114.818.7027.1010.90270.7052.501.5012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard 1 NbV [fine straightened]

  • Standard 1 NbV [fine straightened] profile is fine straightened*!
  • The straightness for fine straightness profiles is ± 0,3 mm per meter.
  • All profiles are made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Profiles in mill finish version/not sandblasted
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats

Clamp flange KF 1 | Article No. 290.004.000

Clamp flange KF 1 | Article No.: 290.004.000
Clamp flange KF 1 | Article No.: 290.004.000

Technical dimensions Clamp flange: KF 1

HBLSJegta1b1d1d2d3e1MGewicht kg
135,46013010105,038,553,012,7100406111826,5M 10x301,95

Clamp flange KF 1

H = Height clamp profile, B = Width clamp flange, L = Lenght clamp flange, S = mounting flange strength, g = Width clamp profile, t = Strenght clamp profile, a1 = Distance pin hole, b1 = Distance pin hole, d1 = Diameter pin hole, d2 = Width slotted hole, d3 = Length slotted hole, e1 = Distance pin hole, M = Thread

 
Technical details:

Standard U-profile NbV fine straightened
Standard 2 NbV [fine straightened]
Article No. 113.012.001 Plus Clamp flange: KF 2

The Standard 2 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 2 NbV [fine straightened] download as PDF

Technical details Standard 2 NbV [fine straightened] | Article No. 113.012.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.012.00120.926.6037.8014.80489.7080.701.6012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard 2 NbV [fine straightened]

  • Standard 2 NbV [fine straightened] profile is fine straightened*!
  • The straightness for fine straightness profiles is ± 0,3 mm per meter.
  • All profiles are made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Profiles in mill finish version/not sandblasted
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats

Clamp flange KF 2 | Article No. 290.005.000

Clamp flange KF 2 | Article No.: 290.005.000
Clamp flange KF 2 | Article No.: 290.005.000

Technical dimensions Clamp flange: KF 2

HBLSJegta1b1d1d2d3e1MGewicht kg
157,28016015123,049,461,214,0130606131830,6M 12x353,85

Clamp flange KF 2

H = Height clamp profile, B = Width clamp flange, L = Lenght clamp flange, S = mounting flange strength, g = Width clamp profile, t = Strenght clamp profile, a1 = Distance pin hole, b1 = Distance pin hole, d1 = Diameter pin hole, d2 = Width slotted hole, d3 = Length slotted hole, e1 = Distance pin hole, M = Thread

 
Technical details:

Standard U-profile NbV fine straightened
Standard 3 NbV [fine straightened]
Article No. 113.013.001 Plus Clamp flange: KF 3

The Standard 3 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 3 NbV [fine straightened] download as PDF

Technical details Standard 3 NbV [fine straightened] | Article No. 113.013.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.013.00128.636.2089.2027.10860.40127.102.0012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard 3 NbV [fine straightened]

  • Standard 3 NbV [fine straightened] profile is fine straightened*!
  • The straightness for fine straightness profiles is ± 0,3 mm per meter.
  • All profiles are made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Profiles in mill finish version/not sandblasted
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats

Clamp flange KF 3 | Article No. 290.006.000

Clamp flange KF 3 | Article No.: 290.006.000
Clamp flange KF 3 | Article No.: 290.006.000

Technical dimensions Clamp flange: KF 3

HBLSJegta1b1d1d2d3e1MGewicht kg
175,08016015137,546,966,216,2130606131833,1M 12x354,30

Clamp flange KF 3

H = Height clamp profile, B = Width clamp flange, L = Lenght clamp flange, S = mounting flange strength, g = Width clamp profile, t = Strenght clamp profile, a1 = Distance pin hole, b1 = Distance pin hole, d1 = Diameter pin hole, d2 = Width slotted hole, d3 = Length slotted hole, e1 = Distance pin hole, M = Thread

 
Technical details:

Standard U-profile NbV fine straightened
Standard 4 NbV [fine straightened]
Article No. 113.014.001 Plus Clamp flange: KF 4

The Standard 4 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 4 NbV [fine straightened] download as PDF

Technical details Standard 4 NbV [fine straightened] | Article No. 113.014.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.014.00136.045.50148.7038.401.480.20188.302.2012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard 4 NbV [fine straightened]

  • Standard 4 NbV [fine straightened] profile is fine straightened*!
  • The straightness for fine straightness profiles is ± 0,3 mm per meter.
  • All profiles are made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Profiles in mill finish version/not sandblasted
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats

Clamp flange KF 4 | Article No. 290.007.000

Clamp flange KF 4 | Article No.: 290.007.000
Clamp flange KF 4 | Article No.: 290.007.000

Technical dimensions Clamp flange: KF 4

HBLSJegta1b1d1d2d3e1MGewicht kg
201,58016015159,044,471,219,4130606131835,6M 12x355,20

Clamp flange KF 4

H = Height clamp profile, B = Width clamp flange, L = Lenght clamp flange, S = mounting flange strength, g = Width clamp profile, t = Strenght clamp profile, a1 = Distance pin hole, b1 = Distance pin hole, d1 = Diameter pin hole, d2 = Width slotted hole, d3 = Length slotted hole, e1 = Distance pin hole, M = Thread

 
Technical details:

Standard U-profile NbV fine straightened
Standard 5 NbV [fine straightened]
Article No. 113.015.001

The Standard 5 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 5 NbV [fine straightened] download as PDF

Technical details Standard 5 NbV [fine straightened] | Article No. 113.015.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.015.00142.854.40203.1047.702.167.70247.702.4012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard 5 NbV [fine straightened]

  • Standard 5 NbV [fine straightened] profile is fine straightened*!
  • The straightness for fine straightness profiles is ± 0,3 mm per meter.
  • All profiles are made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Profiles in mill finish version/not sandblasted
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile NbV fine straightened
Standard 6 NbV [fine straightened]
Article No. 113.016.001

The Standard 6 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 6 NbV [fine straightened] download as PDF

Technical details Standard 6 NbV [fine straightened] | Article No. 113.016.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.016.00152.366.30266.4056.403.402.50337.702.4012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard 6 NbV [fine straightened]

  • Standard 6 NbV [fine straightened] profile is fine straightened*!
  • The straightness for fine straightness profiles is ± 0,3 mm per meter.
  • All profiles are made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Profiles in mill finish version/not sandblasted
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile NbV fine straightened
Standard 7 NbV [fine straightened]
Article No. 113.017.001

The Standard 7 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 7 NbV [fine straightened] download as PDF

Technical details Standard 7 NbV [fine straightened] | Article No. 113.017.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.017.00165.283.00479.4087.605.702.60498.002.8012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard U-profile Standard 7 NbV [fine straightened]

  • Hot rolled profile in sandblasted version.
  • Profile is made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Production-related straightness ± 1,0 mm/meter.
  • This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile NbV fine straightened
Standard 8 NbV [fine straightened]
Article No. 113.018.001

The Standard 8 NbV [fine straightened] profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet Standard 8 NbV [fine straightened] download as PDF

Technical details Standard 8 NbV [fine straightened] | Article No. 113.018.001

Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cmLmax in m
113.018.00178.8100.10721.50125.108.605.40681.603.2012
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle , Lmax = Maximum production length

Material properties Standard 8 NbV [fine straightened]

  • Standard 8 NbV [fine straightened] profile is fine straightened*!
  • The straightness for fine straightness profiles is ± 0,3 mm per meter.
  • All profiles are made from high-quality steel S450 J2 mod.
  • Higher load capacity with new NbV-series
  • Profiles in mill finish version/not sandblasted
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
Technical details

Datasheet

download as PDF
More CAD formats
FAST PICK LIVE Test
Book an appointment now!