Close

Limit search with filter

Contact 
 

Standard U-profiles drilled type PG

Standard U-profile drilled type PG

Advantages Standard U-profiles drilled type PG

  • Ready to mount profiles suitable for standard WINKEL Bearing with standardized thread holes
  • Lmax = 12m
Special lengths on request
PG 0 NbV
Article number: 113.021.000PG 1 NbV
Article number: 113.021.001PG 2 NbV
Article number: 113.021.002PG 3 NbV
Article number: 113.021.003PG 4 NbV
Article number: 113.021.004PG 5 NbV
Article number: 113.021.005PG 6 NbV
Article number: 113.021.006PG 7 NbV
Article number: 113.021.007PG 8 NbV
Article number: 113.021.008
 
Technical details:

Standard U-profile drilled type PG
PG 0 NbV
Article No. 113.021.000

The PG 0 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 0 NbV download as PDF

Technical details PG 0 NbV | Article No. 113.021.000

A  + 2
- 1
[mm]
B ± 1.5
[mm]		C
[mm]		D ± 0.8
[mm]		E
[mm]		F
[mm]		GLmax in m
86.735.075.862.76.015.0M812
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.0009.513.3015.306.60136.0031.401.30
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 0 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile drilled type PG
PG 1 NbV
Article No. 113.021.001

The PG 1 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 1 NbV download as PDF

Technical details PG 1 NbV | Article No. 113.021.001

A ± 1.5
[mm]		B ± 1.5
[mm]		C
[mm]		D ± 0.5
[mm]		E
[mm]		F
[mm]		GLmax in m
103.239.089.070.86.718.0M1012
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.00113.518.7027.1010.90270.7052.501.50
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 1 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile drilled type PG
PG 2 NbV
Article No. 113.021.002

The PG 2 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 2 NbV download as PDF

Technical details PG 2 NbV | Article No. 113.021.002

A ± 1.5
[mm]		B ± 1.5
[mm]		C
[mm]		D ± 0.5
[mm]		E
[mm]		F
[mm]		GLmax in m
121.339.0101.778.78.820.0M1212
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.00218.326.6037.8014.80489.7080.701.60
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 2 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile drilled type PG
PG 3 NbV
Article No. 113.021.003

The PG 3 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 3 NbV download as PDF

Technical details PG 3 NbV | Article No. 113.021.003

A ± 1.75
[mm]		B ± 1.5
[mm]		C
[mm]		D ± 0.35
[mm]		E
[mm]		F
[mm]		GLmax in m
135.451.0114.289.410.720.0M1212
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.00326.236.2089.2027.10860.40127.102.00
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 3 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile drilled type PG
PG 4 NbV
Article No. 113.021.004

The PG 4 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 4 NbV download as PDF

Technical details PG 4 NbV | Article No. 113.021.004

A  + 1.8
- 1.7
[mm]
B ± 1.5
[mm]		C
[mm]		D ± 0.5
[mm]		E
[mm]		F
[mm]		GLmax in m
157.259.0134.6108.411.820.0M1212
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.00432.545.50148.7038.401.480.20188.302.20
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 4 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile drilled type PG
PG 5 NbV
Article No. 113.021.005

The PG 5 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 5 NbV download as PDF

Technical details PG 5 NbV | Article No. 113.021.005

A ± 1.75
[mm]		B ± 1.5
[mm]		C
[mm]		D ± 0.5
[mm]		E
[mm]		F
[mm]		GLmax in m
175.064.0151.5123.814.030.0M1612
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.00539.154.40203.1047.702.167.70247.702.40
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 5 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile drilled type PG
PG 6 NbV
Article No. 113.021.006

The PG 6 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 6 NbV download as PDF

Technical details PG 6 NbV | Article No. 113.021.006

A ± 1.5
[mm]		B ± 1.5
[mm]		C
[mm]		D ± 0.5
[mm]		E
[mm]		F
[mm]		GLmax in m
201.569.0177.8150.117.230.0M1612
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.00647.866.30266.4056.403.402.50337.702.40
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 6 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile drilled type PG
PG 7 NbV
Article No. 113.021.007

The PG 7 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 7 NbV download as PDF

Technical details PG 7 NbV | Article No. 113.021.007

A ± 1.5
[mm]		B ± 2
[mm]		C
[mm]		D ± 0.5
[mm]		E
[mm]		F
[mm]		GLmax in m
229.081.0200.0171.118.030.0M1612
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.00747.883.00479.4087.605.702.60498.002.80
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 7 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
 
Technical details:

Standard U-profile drilled type PG
PG 8 NbV
Article No. 113.021.008

The PG 8 NbV profile is fine straightened*!

*The straightness for fine straightness profiles is ± 0,3 mm per meter, Standard profiles ± 1,0 mm per meter.
Datasheet PG 8 NbV download as PDF

Technical details PG 8 NbV | Article No. 113.021.008

A ± 2.1
[mm]		B ± 2.2
[mm]		C
[mm]		D ± 0.7
[mm]		E
[mm]		F
[mm]		GLmax in m
252.587.0217.0181.116.440.0M2012
A = Total height ± tolerance, B = Total width ± tolerance, C = Width roller axial bearing, D = Sectional dimension roller ± tolerance, E = Bar width, F = Depth of threaded hole, G = Thread, Lmax = Maximum production length
Article numberm kg/mA cm²lx cm⁴Wx cm³ly cm⁴Wy cm³ey cm
113.021.00871.7100.10721.50125.108.605.40681.603.20
m = mass, A = surface, Ix = surface moment, Wx = resistance moment, Iy = surface moment, Wy = resistance moment , ey = distance measure of the y-angle

Material properties Type PG 8 NbV

  • Profile is made from high-quality steel S450 J2 mod.
  • Profile sandblasted and fine straightened ± 0,3mm / rm
  • Higher load capacity with new NbV-series
  • Lmax = Maximum production length 12m

Feinrichten WINKEL U-Profile

[1:37]
3D CAD file

Format: STEP

Download CAD file
2D CAD file

Format: DWG

Download CAD file
Technical details

Datasheet

download as PDF
More CAD formats
FAST PICK LIVE Test
Book an appointment now!