Driven VULKOLLAN® WINKEL Bearings

Driven VULKOLLAN<sup>®</sup> WINKEL-Bearing

Driven VULKOLLAN^® WINKEL-Bearing Type: VD 1432 - VD 1792

With drive shaft
Silent run by VULKOLLAN^® coated bearings
Travel speed up to 16 ft/sec
Acceleration max 2.5 m/sec²
Low friction by precision ball bearings in 2RS version
Runs wear-resistant
WINKEL-Bearings are lubricated for life

Following Driven VULKOLLAN^® WINKEL-Bearings + Flange Plate are availiable!

Type: VD 1432 | Ø 143,2mm | F_R kN: 6,00 | F_A kN: 3,00

VD 1432
Article No. 231.500.000

Type: VD 1792 | Ø 179,2mm | F_R kN: 10,00 | F_A kN: 3,00

VD 1792
Article No. 231.501.000

For economical designs in machines, lifting and handling systems.

Advantage of the WINKEL Bearing system:

Reduces your designing and production costs
Can take up high radial and axial loads
Strong profiles for high stat. and dynamic loads
Best dispersion of forces in the profiles
Longer lifetime for bearings and profiles
Economical assembling by welding bolt
Bearing components are easily exchangeable

Technical details:

Outer rings are made from case-hardened steel UNI 16 CrNi 4 hardened at 62+2HRC
Inner rings are made from bearing steel En 31-SAE 52100 hardened at 62-2 HRC
Cylindrical rollers have flat ground heads, made from En 31-SAE 52100 steel hardened at 59 – 64 HRC
Welding bolts are made from C22E (Material no. 1.1151)
Bolt tolerance –0.05 mm
Bearings from 4.054 to 4.063 are relubricateable
Bearings are lubricated with grease grade 3 (e.g. Shell Gadus S2 V100 3)
Standard WINKEL Bearings are resistant from -20 °C to +80 °C
WINKEL High Temperature Bearings can be used at max. +250 °C environmental temperature.
The max. speed for WINKEL Bearings in steel version is 3m/s.
For VULKOLLAN^® and POLYAMIDE kind of bearings is the max. speed 6 m/s.
The clearance between axial bearing and inner side of the profile should not exceed 0,5 mm.