通过过滤器对搜索进行限制

技术说明 WINKEL直线系统

WINKEL-Profiles

WINKEL U-Profiles with 30% increased load capacity

  • Higher load capacity at same sizes by using profiles with steelgrade S450 J2 mod.
  • Choice of smaller sizes (price advantage)
  • Higher resistance against wear out effects

S355 J2 - S450 J2 mod. 钢材等级对比

Hinweis: Streckgrenze 1 gilt für Flanschdicken < 20 mm, Streckgrenze 2 gilt für Flanschdicken ab 20 mm.
特性 S355 J2 S450 J2 mod.
屈服点 1 min 355 MPa [N/mm²] min 430 MPa [N/mm²]
屈服点 2 min 345 MPa [N/mm²] min 420 MPa [N/mm²]
抗拉强度 470 - 630 MPa [N/mm²] 550 - 700 MPa [N/mm²]
最大赫兹压力 750 MPa [N/mm²] 900 MPa [N/mm²]

Strength properties steel S450 J2

Because of micro alloying with Vanadium and/or Niobium the steel grade S450J2 mod. has a significantly higher tensile and yield strength and a more fine-grained structure than the customary steel grade S355 J2.
In consequence of this and due to a stronger limitation of the elements P and S the steel shows a higher resistance to brittle fracture. Related to this is an increased bearing pressure which is shown by the diagram below.

Load capacity of radial bearings in comparison:


WINKEL-Bearings

是专门为机械加工、升降和装卸运输系统而做的经济性设计

WINKEL 轴承系统的优点

  • 降低设计生产成本
  • 可接受高径向和轴向载荷
  • 坚固的导轨,适合于高动载荷和静载荷
  • 承载力在导轨上能很好分布
  • 轴承和导轨的使用寿命长
  • 可通过焊接螺栓组装,经济实用
  • 轴承部件易于更换

技术特性

  • 外圈由表面硬化钢 UNI 16CrNi 4 制成,硬度为 62+2HRC
  • 内圈由轴承钢 En 31-SAE 52100 制成,硬度为 62-2HRC
  • 滚柱头扁平,由 En 31-SAE 52100 钢制成,硬度为 59~64HRC
  • 焊接螺栓由 C20(材料编号 1.1151)制成
  • 螺栓公差 –0.05 毫米
  • 从 4.054 到 4.063 的轴承可重复润滑
  • 可用 3 级油脂(例如:Shell Gadus S2 V100 3)润滑WINKEL 轴承
  • WINKEL 轴承工作温度为 -20°C 至 +80°C
  • 250°C以上的WINKEL高温轴承请参见HT系列

隐私设置

我们在网站上使用Cookies。其中一些是必要和必不可少的,而其他一些则可以帮助我们访问本网站并了解和优化网站的使用。

您可以随时调整这些设置。

此网站上更多关于使用Cookies的信息可在...找到 隐私设置.