m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type
Standard A
In cold rolled version
Standard profiles are generally sandblasted
Profile made from high-quality steel in UNI FE 360 B
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type
Standard S
In cold rolled version
Standard profiles are generally sandblasted
Profile made from high-quality steel in UNI FE 360 B
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 0 NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 1 NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 2 NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 3 NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 4 NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 5 NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 6 NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 7® NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 8 NbV
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 0 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 1 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 2 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 3 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 4 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 5 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 6 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 7® NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type PR 8 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.000
9.5
13.30
15.30
6.60
136.00
31.40
1.30
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 0 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.001
13.5
18.70
27.10
10.90
270.70
52.50
1.50
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 1 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.002
18.3
26.60
37.80
14.80
489.70
80.70
1.60
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 2 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.003
26.2
36.20
89.20
27.10
860.40
127.10
2.00
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 3 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.004
32.5
45.50
148.70
38.40
1.480.20
188.30
2.20
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 4 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.005
39.1
54.40
203.10
47.70
2.167.70
247.70
2.40
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 5 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.006
47.8
66.30
266.40
56.40
3.402.50
337.70
2.40
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 6 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.007
47.8
83.00
479.40
87.60
5.702.60
498.00
2.80
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 7 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
ey cm
113.021.008
71.7
100.10
721.50
125.10
8.605.40
681.60
3.20
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
Material properties
Type PG 8 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.010.000
71.0
90.30
6.814.10
592.50
469.80
98.90
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 10 [beidseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.010.001
74.4
94.80
6.963.50
605.50
490.10
103.20
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 10 [einseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.016.000
100.0
127.40
11.951.20
937.40
1.202.70
185.00
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 16 [beidseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.016.001
104.2
94.80
12.214.70
958.00
490.10
103.20
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 16 [einseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.018.000
128.0
163.00
21.006.20
1.424.20
2.122.30
283.00
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 18 [beidseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.018.001
132.7
169.10
21.448.20
1.454.10
2.205.00
294.00
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 18 [einseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.028.000
175.0
222.70
37.877.00
2.195.80
3.279.10
409.90
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 28 [beidseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.028.001
179.5
228.70
38.424.10
2.227.50
3.373.50
421.70
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 28 [einseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.036.000
215.0
274.10
55.201.00
2.944.10
5.498.50
578.80
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 36 [beidseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.036.001
220.4
280.80
56.013.70
2.987.40
5.655.50
595.30
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 36 [einseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.042.000
245.0
312.10
69.285.60
3.508.10
6.641.60
699.10
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 42 [beidseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.042.001
250.2
318.80
70.098.20
3.549.30
6.799.00
715.70
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 42 [einseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.050.000
393.0
501.20
161.897.30
6.816.70
18.650.80
1.535.10
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 50 [beidseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = deep tread axial bearing,
G = Sectional dimension,
Lmax = Maximum production length
Article number
m kg/m
A cm²
lx cm⁴
Wx cm³
ly cm⁴
Wy cm³
112.050.001
399.6
509.10
163.263.10
6.874.20
18.976.70
1.561.90
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
Material properties
Type Standard 50 [einseitig]
Welded and milled heavy-duty guide profile, made of high-quality steel in S355 J2
Lmax = Maximum production length 12m
Production-related straightness ± 1,0 mm/meter
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 0 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 1 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 2 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 3 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 4 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 5 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 6 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 7 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
A = Total height ± tolerance,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
E = Bar width,
F = Depth of threaded hole,
G = Thread,
Lmax = Maximum production length
Material properties
Type PG-PR 8 NbV
Profile is made from high-quality steel S450 J2 mod.
Profile sandblasted and fine straightened ± 0,3mm / rm
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard A
All profiles are made from high-quality steel in UNI FE 360 B
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard S
All profiles are made from high-quality steel in UNI FE 360 B
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard M
All profiles are made from high-quality steel in UNI FE 360 B
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard V-L
Strong-walled, robust guide profile
Material: S355 J2
Higher manufacturing precision
Profiles laser welded
Suitable for VULKOLLAN®- and POLYAMIDE WINKEL-Bearing system
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard V
All profiles are made from high-quality steel in UNI FE 360 B
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard R
All profiles are made from high-quality steel in UNI FE 360 B
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard W
All profiles are made from high-quality steel in UNI FE 360 B
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard X
All profiles are made from high-quality steel in UNI FE 360 B
m = mass,
A = Total height,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
Lmax = Maximum production length
Material properties
Type PG V-L
Strong-walled, robust guide profile
Ready to mount profiles with standardized thread holes
Material: S355 J2
Profiles laser welded
Suitable for VULKOLLAN® - and POLYAMIDE WINKEL Bearings
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard R-L
Strong-walled, robust guide profile
Material: S355 J2
Higher manufacturing precision
Profiles laser welded
Suitable for VULKOLLAN®- and POLYAMIDE WINKEL-Bearing system
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard W-L
Strong-walled, robust guide profile
Material: S355 J2
Higher manufacturing precision
Profiles laser welded
Suitable for VULKOLLAN®- and POLYAMIDE WINKEL-Bearing system
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard X-L
Strong-walled, robust guide profile
Material: S355 J2
Higher manufacturing precision
Profiles laser welded
Suitable for VULKOLLAN®- and POLYAMIDE WINKEL-Bearing system
m = mass,
A = Total height,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
Lmax = Maximum production length
Material properties
Type PG R-L
Strong-walled, robust guide profile
Ready to mount profiles with standardized thread holes
Material: S355 J2
Profiles laser welded
Suitable for VULKOLLAN® - and POLYAMIDE WINKEL Bearings
m = mass,
A = Total height,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
Lmax = Maximum production length
Material properties
Type PG W-L
Strong-walled, robust guide profile
Ready to mount profiles with standardized thread holes
Material: S355 J2
Profiles laser welded
Suitable for VULKOLLAN® - and POLYAMIDE WINKEL Bearings
m = mass,
A = Total height,
B = Total width ± tolerance,
C = Width roller axial bearing,
D = Sectional dimension roller ± tolerance,
Lmax = Maximum production length
Material properties
Type PG X-L
Strong-walled, robust guide profile
Ready to mount profiles with standardized thread holes
Material: S355 J2
Profiles laser welded
Suitable for VULKOLLAN® - and POLYAMIDE WINKEL Bearings
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard S-ALU
Made of high-quality aluminium AW 6060 T66 according DIN EN 12020-2
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard M-ALU
Made of high-quality aluminium AW 6060 T66 according DIN EN 12020-2
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard V-ALU
Made of high-quality aluminium AW 6060 T66 according DIN EN 12020-2
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard R-ALU
Made of high-quality aluminium AW 6060 T66 according DIN EN 12020-2
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard W-ALU
Made of high-quality aluminium AW 6060 T66 according DIN EN 12020-2
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard X-ALU
Made of high-quality aluminium AW 6060 T66 according DIN EN 12020-2
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties Standard 0 NbV [fine straightened]
Standard 0 NbV [fine straightened] profile is fine straightened*!
The straightness for fine straightness profiles is ± 0,3 mm per meter.
All profiles are made from high-quality steel S450 J2 mod.
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties Standard 1 NbV [fine straightened]
Standard 1 NbV [fine straightened] profile is fine straightened*!
The straightness for fine straightness profiles is ± 0,3 mm per meter.
All profiles are made from high-quality steel S450 J2 mod.
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties Standard 2 NbV [fine straightened]
Standard 2 NbV [fine straightened] profile is fine straightened*!
The straightness for fine straightness profiles is ± 0,3 mm per meter.
All profiles are made from high-quality steel S450 J2 mod.
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties Standard 3 NbV [fine straightened]
Standard 3 NbV [fine straightened] profile is fine straightened*!
The straightness for fine straightness profiles is ± 0,3 mm per meter.
All profiles are made from high-quality steel S450 J2 mod.
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties Standard 4 NbV [fine straightened]
Standard 4 NbV [fine straightened] profile is fine straightened*!
The straightness for fine straightness profiles is ± 0,3 mm per meter.
All profiles are made from high-quality steel S450 J2 mod.
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties Standard 5 NbV [fine straightened]
Standard 5 NbV [fine straightened] profile is fine straightened*!
The straightness for fine straightness profiles is ± 0,3 mm per meter.
All profiles are made from high-quality steel S450 J2 mod.
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties Standard 6 NbV [fine straightened]
Standard 6 NbV [fine straightened] profile is fine straightened*!
The straightness for fine straightness profiles is ± 0,3 mm per meter.
All profiles are made from high-quality steel S450 J2 mod.
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Standard U-profile
Standard 7 NbV [fine straightened]
Hot rolled profile in sandblasted version.
Profile is made from high-quality steel S450 J2 mod.
Higher load capacity with new NbV-series
Production-related straightness ± 1,0 mm/meter.
This profile is availiable as fine straightened style on request (± 0,3 mm per meter)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties Standard 8 NbV [fine straightened]
Standard 8 NbV [fine straightened] profile is fine straightened*!
The straightness for fine straightness profiles is ± 0,3 mm per meter.
All profiles are made from high-quality steel S450 J2 mod.
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard S INOX
Made of UNS S30400 (USA), Grade 304S18 (UK), Z 6 CN 18.09 (France)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard 1 INOX-L
Made of UNS S30400 (USA), Grade 304S18 (UK), Z 6 CN 18.09 (France)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard 2 INOX-L
Made of UNS S30400 (USA), Grade 304S18 (UK), Z 6 CN 18.09 (France)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard 2 INOX-light
Made of UNS S30400 (USA), Grade 304S18 (UK), Z 6 CN 18.09 (France)
m = mass,
A = surface,
Ix = surface moment,
Wx = resistance moment,
Iy = surface moment,
Wy = resistance moment
,
ey = distance measure of the y-angle
,
Lmax = Maximum production length
Material properties
Type Standard 3 INOX-L
Made of UNS S30400 (USA), Grade 304S18 (UK), Z 6 CN 18.09 (France)
Do you have any questions or do you need informations about WINKEL linear guides, WINKEL-Bearings, WINKEL profiles, WINKEL flangeplates and accessories?
