Restreindre la recherche avec un filtre

WINKEL galet axiaux fixes

WINKEL galet axiaux fixes Type: 4.053 - 4.064

  • Regraissage possible pour les galet 4.054 à 4.064
Type: 4.053 | Ø 52,5mm | FR kN: 5,23 | FA kN: 1,68
Type: 4.054 | Ø 62,5mm | FR kN: 10,30 | FA kN: 3,20
Type: 4.055 | Ø 70,1mm | FR kN: 12,40 | FA kN: 3,87
Type: 4.056 | Ø 77,7mm | FR kN: 12,90 | FA kN: 4,00
Type: 4.057 | Ø 77,7mm | FR kN: 12,90 | FA kN: 4,00
Type: 4.058 | Ø 88,4mm | FR kN: 22,40 | FA kN: 7,00
Type: 4.059 | Ø 101,2mm | FR kN: 22,00 | FA kN: 7,00
Type: 4.060 | Ø 107,7mm | FR kN: 23,80 | FA kN: 7,44
Type: 4.061 | Ø 107,7mm | FR kN: 23,80 | FA kN: 7,44
Type: 4.062 | Ø 123,0mm | FR kN: 33,90 | FA kN: 10,60
Type: 4.063 | Ø 149,0mm | FR kN: 59,20 | FA kN: 18,50
Type: 4.064 | Ø 170,0mm | FR kN: 72,00 | FA kN: 18,50
WINKEL galet de précision axial fixe

WINKEL galet de précision axial fixe Type: PR 4.054 - PR 4.064

  • Les galet de précision WINKEL présentent moins de jeu entre les galets et le profilé
Type: PR 4.054 | Ø 64,8mm | FR kN: 10,30 | FA kN: 3,20
Type: PR 4.055 | Ø 73,8mm | FR kN: 12,40 | FA kN: 3,87
Type: PR 4.056 | Ø 81,8mm | FR kN: 12,90 | FA kN: 4,00
Type: PR 4.058 | Ø 92,8mm | FR kN: 22,40 | FA kN: 7,00
Type: PR 4.061 | Ø 111,8mm | FR kN: 23,80 | FA kN: 7,44
Type: PR 4.062 | Ø 127,8mm | FR kN: 33,90 | FA kN: 10,60
Type: PR 4.063 | Ø 153,8mm | FR kN: 59,20 | FA kN: 18,50
Type: PR 4.064 | Ø 175,7mm | FR kN: 72,00 | FA kN: 18,50
WINKEL galet à haute température

WINKEL galet à haute température Type: 4.053 HT - 4.063 HT

  • les galet WINKEL de la gamme Ht (haute température) sont recommandés pour des utilisations jusqu'à 250°C
  • Les galet WINKEL disposent d'un jeu C3, de graisse haute température et de joints VITON
  • Regraissage sur demande
WINKEL galet de précision axial réglable par excentrique

WINKEL galet de précision axial réglable par excentrique Type: PR 4.464 - PR 4.463

  • Les galet de précision WINKEL présentent moins de jeu entre les galets et le profilé
  • Galets WINKEL graissés à vie
Type: 4.052 P | Ø 40,0mm | FR kN: 1,00 | FA kN: 3,10 | C kN: 10,5 | CO kN: 5,7
Type: 4.072 P | Ø 62,5mm | FR kN: 10,30 | FA kN: 4,00
Type: 4.073 P | Ø 70,1mm | FR kN: 12,40 | FA kN: 6,70
Type: 4.074 P | Ø 78,1mm | FR kN: 12,90 | FA kN: 7,20
Type: 4.076 P | Ø 88,4mm | FR kN: 22,40 | FA kN: 8,90
Type: 4.0784 P | Ø 107,7mm | FR kN: 23,80 | FA kN: 14,40
Type: 4.079 P | Ø 123,0mm | FR kN: 33,90 | FA kN: 38,40
Type: 4.080 P | Ø 149,0mm | FR kN: 59,20 | FA kN: 41,60
Type: 4.084 P | Ø 170,0mm | FR kN: 72,00 | FA kN: 41,60
Type: 4.085 P | Ø 180,0mm | FR kN: 91,80 | FA kN: 41,60
Type: PR 4.072 P | Ø 64,8mm | FR kN: 10,30 | FA kN: 4,00
Type: PR 4.073 P | Ø 73,8mm | FR kN: 12,40 | FA kN: 6,70
Type: PR 4.074 P | Ø 81,8mm | FR kN: 12,90 | FA kN: 7,20
Type: PR 4.076 P | Ø 92,8mm | FR kN: 22,40 | FA kN: 8,90
Type: PR 4.0784 P | Ø 111,8mm | FR kN: 23,80 | FA kN: 14,40
Type: PR 4.079 P | Ø 127,8mm | FR kN: 33,90 | FA kN: 38,40
Type: PR 4.080 P | Ø 153,8mm | FR kN: 59,20 | FA kN: 41,60
Type: PR 4.084 P | Ø 175,7mm | FR kN: 72,00 | FA kN: 41,60
Type: PR 4.085 P | Ø 184,8mm | FR kN: 91,80 | FA kN: 41,60
WINKEL galet avec axes

WINKEL galet avec axes Type: KB 4.072 - KB 4.080

  • Possibilité de fixation universelle
  • Fixation au choix par vissage ou soudure
  • Pas de platine nécessaire
Type: KB 4.072 | Ø 62,5mm | FR kN: 10,30 | FA kN: 3,20 | C kN: 8,0 | CO kN: 8,0
Type: KB 4.073 | Ø 70,1mm | FR kN: 12,40 | FA kN: 3,87
Type: KB 4.074 | Ø 78,1mm | FR kN: 12,90 | FA kN: 4,00
Type: KB 4.076 | Ø 88,4mm | FR kN: 22,40 | FA kN: 7,00
Type: KB 4.0784 | Ø 107,7mm | FR kN: 23,80 | FA kN: 7,44
Type: KB 4.079 | Ø 123,0mm | FR kN: 33,90 | FA kN: 10,60
Type: KB 4.080 | Ø 149,0mm | FR kN: 39,50 | FA kN: 18,50
WINKEL galet de précision avec axes

WINKEL galet de précision avec axes Type: KB PR 4.072 - KB PR 4.080

  • Possibilité de fixation universelle
  • Fixation au choix par vissage ou soudure
  • Pas de platine nécessaire
Type: KB PR 4.072 | Ø 64,8mm | FR kN: 10,30 | FA kN: 3,20
Type: KB PR 4.073 | Ø 73,8mm | FR kN: 12,40 | FA kN: 3,87
Type: KB PR 4.074 | Ø 81,8mm | FR kN: 12,90 | FA kN: 4,00
Type: KB PR 4.076 | Ø 92,8mm | FR kN: 22,40 | FA kN: 7,00
Type: KB PR 4.0784 | Ø 111,8mm | FR kN: 23,80 | FA kN: 7,44
Type: KB PR 4.079 | Ø 127,8mm | FR kN: 33,90 | FA kN: 10,60
Type: KB PR 4.080 | Ø 153,8mm | FR kN: 39,50 | FA kN: 18,50
WINKEl galet avec axe et insert OILAMID*

WINKEl galet avec axe et insert OILAMID* Type: KB 4.072 P - KB 4.080 P

  • Possibilité de fixation universelle
  • Fixation au choix par vissage ou soudure
Type: KB 4.072 P | Ø 62,5mm | FR kN: 10,30 | FA kN: 4,00
Type: KB 4.073 P | Ø 70,1mm | FR kN: 12,40 | FA kN: 6,70
Type: KB 4.074 P | Ø 78,1mm | FR kN: 12,90 | FA kN: 7,20
Type: KB 4.076 P | Ø 88,4mm | FR kN: 22,40 | FA kN: 8,90
Type: KB 4.0784 P | Ø 107,7mm | FR kN: 23,80 | FA kN: 14,40
Type: KB 4.079 P | Ø 123,0mm | FR kN: 33,90 | FA kN: 38,40
Type: KB 4.080 P | Ø 149,0mm | FR kN: 59,20 | FA kN: 41,60
WINKEL galet de précision avec axe et insert OILAMID*

WINKEL galet de précision avec axe et insert OILAMID* Type: KB PR 4.072 P - KB PR 4.080 P

  • Possibilité de fixation universelle
  • Fixation au choix par vissage ou soudure
Type: KB PR 4.072 P | Ø 64,8mm | FR kN: 10,30 | FA kN: 3,00
Type: KB PR 4.073 P | Ø 73,8mm | FR kN: 12,40 | FA kN: 6,70
Type: KB PR 4.074 P | Ø 81,8mm | FR kN: 12,90 | FA kN: 7,20
Type: KB PR 4.076 P | Ø 92,8mm | FR kN: 22,40 | FA kN: 8,90
Type: KB PR 4.0784 P | Ø 111,8mm | FR kN: 23,80 | FA kN: 14,40
Type: KB PR 4.079 P | Ø 127,8mm | FR kN: 33,90 | FA kN: 38,40
Type: KB PR 4.080 P | Ø 153,8mm | FR kN: 59,20 | FA kN: 41,60
Type: 2.054 | Ø 62,5mm | FR kN: 10,30 | C kN: 31,0 | CO kN: 35,5
Type: 2.055 | Ø 70,1mm | FR kN: 12,40 | C kN: 45,5 | CO kN: 51,0
Type: 2.056 | Ø 77,7mm | FR kN: 12,90 | C kN: 48,0 | CO kN: 56,8
Type: 2.058 | Ø 88,4mm | FR kN: 22,40 | C kN: 68,0 | CO kN: 72,0
Type: 2.061 | Ø 107,7mm | FR kN: 23,80 | C kN: 81,0 | CO kN: 95,0
Type: 2.062 | Ø 123,0mm | FR kN: 33,90 | C kN: 110,0 | CO kN: 132,0
Type: 2.063 | Ø 149,0mm | FR kN: 59,20 | C kN: 151,0 | CO kN: 192,0
Type: 2.064 | Ø 170,0mm | FR kN: 72,00 | C kN: 217,0 | CO kN: 269,0
Type: PR 2.054 | Ø 64,8mm | FR kN: 10,30 | C kN: 31,0 | CO kN: 35,5
Type: PR 2.055 | Ø 73,8mm | FR kN: 12,40 | C kN: 45,5 | CO kN: 51,0
Type: PR 2.056 | Ø 81,8mm | FR kN: 12,90 | C kN: 48,0 | CO kN: 56,8
Type: PR 2.058 | Ø 92,8mm | FR kN: 22,40 | C kN: 68,0 | CO kN: 72,0
Type: PR 2.061 | Ø 111,8mm | FR kN: 23,80 | C kN: 81,0 | CO kN: 95,0
Type: PR 2.062 | Ø 127,8mm | FR kN: 33,90 | C kN: 110,0 | CO kN: 132,0
Type: PR 2.063 | Ø 153,8mm | FR kN: 59,20 | C kN: 151,0 | CO kN: 192,0
Type: PR 2.064 | Ø 175,7mm | FR kN: 72,00 | C kN: 217,0 | CO kN: 269,0
Galet WINKEL charges lourdes

Galet WINKEL charges lourdes Type: 3.054 - 3.064

  • Galet WINKEL Charges Lourdes insensibles à la pollution dans les domaines de la constrcution, fonderie, mines
  • Rouleau radial regraissable sur la face
  • Rouleau axial résistant aux chocs (roulements à billes), joints 2RS, graissé à vie
  • Ajustement axial par câlage
  • Pour utilisations avec vitesses élevées jusqu'à 2 m/s
  • Livré avec 1 graisseur M6x1, joint thorique et 2 entretoises 0,5 mm
Type: 3.054 | Ø 62,5mm | FR kN: 10,30 | FA kN: 3,20
Type: 3.055 | Ø 70,1mm | FR kN: 12,40 | FA kN: 3,87
Type: 3.056 | Ø 77,7mm | FR kN: 12,90 | FA kN: 4,00
Type: 3.058 | Ø 88,4mm | FR kN: 22,40 | FA kN: 7,16
Type: 3.061 | Ø 107,7mm | FR kN: 22,80 | FA kN: 7,44
Type: 3.062 | Ø 123,0mm | FR kN: 33,90 | FA kN: 18,50
Type: 3.063 | Ø 149,0mm | FR kN: 59,20 | FA kN: 18,50
Type: 3.064 | Ø 170,0mm | FR kN: 72,00 | FA kN: 18,50
Galet de précision Charges lourdes

Galet de précision Charges lourdes Type: PR 3.054 - PR 3.064

  • Galet WINKEL Charges Lourdes insensibles à la pollution dans les domaines de la constrcution, fonderie, mines
  • Rouleau radial regraissable sur la face
  • Rouleau axial résistant aux chocs (roulements à billes), joints 2RS, graissé à vie
  • Ajustement axial par câlage
  • Pour utilisations avec vitesses élevées jusqu'à 2 m/s
  • Livré avec 1 graisseur M6x1, joint thorique et 2 entretoises 0,5 mm
Type: PR 3.054 | Ø 64,8mm | FR kN: 10,30 | FA kN: 3,20
Type: PR 3.055 | Ø 73,8mm | FR kN: 12,40 | FA kN: 3,87
Type: PR 3.056 | Ø 81,8mm | FR kN: 12,90 | FA kN: 4,00
Type: PR 3.058 | Ø 92,8mm | FR kN: 22,40 | FA kN: 7,16
Type: PR 3.061 | Ø 111,8mm | FR kN: 23,80 | FA kN: 7,44
Type: PR 3.062 | Ø 127,8mm | FR kN: 33,90 | FA kN: 18,50
Type: PR 3.063 | Ø 153,8mm | FR kN: 59,20 | FA kN: 18,50
Type: PR 3.064 | Ø 175,7mm | FR kN: 72,00 | FA kN: 18,50
Unités combinées ajustables WINKEL pour les profils standard

Unités combinées ajustables WINKEL pour les profils standard Type: JC 4.054 - JC 4.063

  • Réglable progressivement (axial et radial) par l'extérieur
  • Précision de positionnement élevée
Type: JC 4.054 | Ø 62,5mm | FR kN: 10,30 | FA kN: 3,20
Type: JC 4.055 | Ø 70,1mm | FR kN: 12,40 | FA kN: 3,87
Type: JC 4.056 | Ø 77,7mm | FR kN: 12,90 | FA kN: 4,00
Type: JC 4.058 | Ø 88,4mm | FR kN: 22,40 | FA kN: 7,00
Type: JC 4.061 | Ø 107,7mm | FR kN: 23,80 | FA kN: 7,44
Type: JC 4.062 | Ø 123,0mm | FR kN: 33,90 | FA kN: 10,60
Type: JC 4.063 | Ø 149,0mm | FR kN: 59,20 | FA kN: 18,50
Unités combinées ajustables WINKEL

Unités combinées ajustables WINKEL Type: JT 2.055 - JT 2.058

  • Absence de jeu entre le rouleau et le profil
  • Précisions radiale et axiale importantes
  • Résistant à l'encrassement
  • Pour utilisations avec vitesses élevées jusqu'à 2 m/s
Type: JT 2.055 | Ø 70,1mm | FR kN: 12,40 | FA kN: 4,20
Type: JT 2.056 | Ø 77,7mm | FR kN: 12,90 | FA kN: 4,20
Type: JT 2.058 | Ø 88,4mm | FR kN: 22,40 | FA kN: 7,40

Nos galets WINKEL permettent de résoudre économiquement les mouvements verticaux et horizontaux sur les machines et dispositifs de levage.

Avantages du système de galets WINKEL:

  • Réduit vos coûts de conception et de production
  • Le système de galet WINKEL peut reprendre des charges radiales et axiales élevées
  • Profilés de guidage à ailes épaisses pour des charges statiques et dynamiques élevées
  • Meilleure dispersion des forces dans les profils
  • Une durée de vie plus longue pour les galets et les Profilés
  • Économie de temps de montage grâce aux axes soudés
  • Les composants en stock sont faciles à remplace

Données techniques:

  • Les bagues externes sont en acier 20 CrMnTi trempé à 58-62 HRC
  • Les bagues internes sont en acier 100 Cr 6 trempé à 58-62 HRC
  • Galets à tête plate en acier 100 Cr 6 trempé à 60 - 65 HRC
  • Axes à souder en acier C20 (No. de matériel 1.1151)
  • Possibilité de regraissage des galet 4.054 - 4.064
  • Versions standard pour -20 C° à +100 °C de température d'utilisation
  • Les galets WINKEL haute température serie HT peuvent être utilisés jusqu’à +250 °C.
  • La vitesse max. des galets WINKEl en acier est de 1,5 m/s, et 2 m/s pour les galets Heavy-Duty. Pour les galets VULKOLLAN® et POLYAMIDE la vitesse max. est de 6 m/s.
  • Le jeu entre le galets axial et la face interne du profil doit être de 0,5 mm max.
  • Tolérance des boulons -0,05 mm
  • Les galets WINKEL sont graissés au montage avec de la graisse grade 3 (par ex. Shell Gadus S2 V100 3).

Privacy settings

We use cookies on our website. Some of these are necessary and essential, while others help us with this website and understand and optimize the use of the website.

You can adjust these settings at any time.

More information about the use of cookies on this website can be found in the Privacy settings.